Condair ME

Evaporative humidifier and cooler

The Condair ME provides low energy humidity control and evaporative cooling to an air handling unit or duct.

A single unit can provide up to 1,000kg/hr of humidification and 630kW of evaporative cooling to an air stream while operating on less than 0.3kW of electricity. As well as being economic to run the Condair ME is also easy to operate with an advanced touch screen control panel, simple to maintain with industry leading service features and employs the latest in hygiene technology.

Use the myCoolblue app, a simulation tool from Condair to determine how much energy you can save by using an indirect evaporative cooling system.

Features & benefits

  • High humidification and cooling duties from a single unit
  • Very low energy consumption
  • Instant evaporation for short section length
  • In-duct or externally located hydraulic unit
  • Latest touch screen control technology
  • Can operate on mains or RO water

Condair DL

Hybrid humidifier

The Condair DL hybrid humidifier combines spray and evaporative technologies to provide efficient and hygienic in-duct adiabatic humidification.

A grid of low pressure nozzles releases a fine spray into the air stream towards a patented ceramic droplet evaporator. What moisture isn't immediately absorbed by the air precipitates onto the ceramic evaporator. As air flows through its ceramic cassettes, the remaining water is absorbed by the air for highly efficient water use and droplet-free humidification.

Features & benefits

  • Efficient low pressure system for energy savings
  • Ceramic evaporator eliminates aerosols and maximises water evaporation
  • Ultra hygienic with RO water, silver ion, flush cycles and pipework air drying
  • Precise humidity control with 15 stage output

Condair HP

High pressure in-duct spray humidifier

The Condair HP delivers adiabatic humidification and cooling to an air handling unit (AHU) or duct. A series of nozzles mounted across the air stream atomise water under high pressure creating a fine mist that is rapidly absorbed.

A droplet separator downstream removes any unevaporated moisture from the air ensuring droplet-free humidification.

Features & benefits

  • Can supply multiple AHUs from one pump station with up to 1,300kg/h total output
  • Low energy, high capacity humidification and cooling
  • High quality stainless steel construction
  • Oil-free high pressure pump with 8,000 hour warranty
  • Hygienic operation with UV sterlization and flush cycles